Vident iAuto702 Pro Oil Service & Battery Reset for 2010 Jaguar XF

This  article is gonna help customers check if Vident iAuto702 Pro can reset oil service and battery for Jaguar XF 2010.

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-1

What you need:

Car: 2010 Jaguar X250 XF (Engine: 3.0L AJ-V6)

Device: Vident iAuto702 Pro multi-application service tool

Test 1: iAuto702 Pro reset oil service light on 2010 Jaguar XF- success!

Connect iAuto 702 pro to the vehicle

Enter Application main menu -> Select OilReset V16.00

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-2

Read the Oil service light reset prompt:

1.If the service lamp is on, you must provide service for the car. After service, you need to reset the driving mileage or driving time so that the service lamp turns off and the system enables the new service cycle.

2.After changing engine oil or electric appliances that monitor oil life, you need to reset the service lamp.

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-3

Select JAGUAR-Software Reset-> Automatic Scan

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-4 vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-5 vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-6

Switch on ignition, and read out the current vehicle info

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-7

Then follow the operator message on the screen to operate as below:

1.This application will reset the oil service counter. This needs to be used when a vehicle has been serviced.

2.Make sure the key is in the ignition barrel and the ignition is switched off

3.The following steps (1-5) must be completed within 3 seconds or the reset procedure will not start:

1).Press and hold the rear fog lamp switch (Ignition off)

2).Cycle the ignition from off to on

3).Release the rear fog lamp switch

4).Press and hold the ‘trip’ button

5).Whilst holding the ‘trip’ button, press and hold the rear fog lamp switch

Set ignition switch to off/on

Read fault codes

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-8

Clear fault codes

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-9

Set ignition switch to off/on

Control module procedure completed with fault codes logged

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-10

Test 2: iAuto702 Pro reset battery on 2010 Jaguar XF- success!

Back to Application main menu-> select BRT V16.00

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-11

Read the Battery reset instruction as below in the figure

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-12

Select Janguar-> Automatic Scan

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-13 vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-14

Switch on ignition

Read out the current vehicle info

Press OK to reset stored internal battery monitoring data

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-15

Set the ignition switch to on (position 2)

Battery reset succeeded

vident-iauto702-pro-oil-battery-reset-2010-jaguar-xf-16

For your information, here is the full Vident iauto 702Pro Jaguar Oil service light and battery reset list:

Function Car brand Model Year
Oil service light reset JAGUAR F-TYPE As of 2014
Oil service light reset JAGUAR S-TYPE 2006-2008
Oil service light reset JAGUAR XF As of 2008
Oil service light reset JAGUAR XJ As of 2006
Oil service light reset JAGUAR XK 2010-2013
Oil service light reset JAGUAR XE As of 2016
Oil service light reset JAGUAR F-Pace As of 2017
BATTERY RESET JAGUAR XF 2008-
BATTERY RESET JAGUAR XK 2010-2015
BATTERY RESET JAGUAR XJ 2010-
BATTERY RESET JAGUAR F-TYPE 2014-
BATTERY RESET JAGUAR XE 2016-
BATTERY RESET JAGUAR F-PACE 2017-

Hope it helps you!

Contact information:

Email: sales@VidentShop.co.uk
Skype: Sales@VidentShop.co.uk
Whatsapp: +86-15002705698

https://www.videntshop.co.uk/