This article shares the step-by step tutorial on registering and software updating on Vident iLink400/ iLink450/ iLink410 professional scan tools.
Check General Product Information:
VIDENT iLink400 Full System Single Make Scan tool is the most cost-effective professional multi-system scan tool that delivers OE-level diagnosis for all electronic systems of different car brands.It not only includes basic functions such as read/erase codes and live data, but also it’s capable of advanced functions such as actuation, adaptation and programming.In addition, it lets you to access the most commonly required service features such as Oil service Light Reset, Throttle Body Alignment, Electronic Parking Brake Service, Battery configuration, Steering Angel Sensor Calibration, CBS correct and much more.
Vident iLink450 Full Service Tool is specially designed for professional technicians and car repair shops to provide service of individual specialized systems. The functions include EPB, Oil Service, ABS & SRS reset, Battery Configuration, Steering Angle Sensor Calibration, DPF regeneration and Throttle body alignment.
This new ABS&SRS Reset Tool iLink410 is built to help the diagnosis of ABS and airbag faults and determine why the ABS&SRS warning light is on. Featured with ABS and SRS system diagnosis, ABS and SRS bi-directional tests, ABS bleeding, SRS reset , steering angle sensor calibration, Electronic parking brake reset functionalities and wide vehicle coverage, i410 is the perfect tool that professional mechanics can’t wait to have.
Check Register & Software Update step-by-step-tutorial below:
Step One – Install the Update Client
(2)The file downloaded will be a compressed zip file. Open that file and run the installer inside it.
Alternatively, you can install the update client from the CD that comes in the product package.
Step Two – Create Your Vident Account
Firstly you need to create an account with Vident.
(1)Once installed, boots up the iScanzilla software, click the Register button.
(2)Fill out the registration form and submit.
Alternatively, you can click the Sign Up button on the right upper side of our website to create an user account.
Step Three – Register Your product
(1) When logged in iScanzilla, click the ‘Register Products’ icon
(2)On the ‘S/N Registration’ tab, put a tick in the box marked ‘001’ then enter the product’s serial number & password, and click Submit.
Please connect the scan tool with computer through the USB cable, select Setup > About to check the Serial Number and ‘Register Password”.
(3)A confirmation box should be shown confirming successful registration.
Alternatively, you can register the product in the member center when logged in on our website.
Step Four – Update the Software
(1)Now close the iScanzilla software, remove the TF card from your tool (making sure the tool is turned off first!) and connect it to the PC via an TF card reader.
(2)Once Windows has detected the TF card, run the iScanzilla software and login again. click the ‘My Updates’ button. After a few seconds, a list of the available software updates will appear.
Ensure that the correct serial number is displayed in the drop-down list.
(3)Click the Update button to download and install available updates.
Please have your attention here: the update process can take a long time. If your tool has not been updated recently, it may take a few hours for the update process to complete. Once the update has completed, don’t forget to ‘safely remove’ the SD card in Windows before unplugging it, to avoid the possibility of data corruption.
If you want to get a good price for this tool, please contact us at: